關閉
返回頂部

<address id="fhlll"></address>

      <form id="fhlll"></form>
      <form id="fhlll"><nobr id="fhlll"><meter id="fhlll"></meter></nobr></form>
      <form id="fhlll"></form>
          <noframes id="fhlll"><address id="fhlll"><nobr id="fhlll"></nobr></address> <address id="fhlll"><address id="fhlll"></address></address>

            聯系方式
            保定宏晟隆精密鑄造有限公司
            公司地址:保定南市區朱莊
            電 話:0312-8928995
            電 話:0312-2157611
            手 機:13833227175
            傳 真:0312-2115599
            網 址:www.phecda.org
            當前位置:熔模鑄件尺寸精度較高
            [來源:www.phecda.org] [作者:精密鑄造] [日期:21-03-29]

            熔模鑄件尺寸精度較高,一般可達CT4-6(砂型鑄造為CT10~13,壓鑄為CT5~7),當然由于熔模鑄造的工藝過程復雜,影響鑄件尺寸精度的因素較多,例如模料的收縮、熔模的變形、型殼在加熱和冷卻過程中的線量變化、合金的收縮率以及在凝固過程中鑄件的變形等,所以普通熔模鑄件的尺寸精度雖然較高,但其一致性仍需提高(采用中、高溫蠟料的鑄件尺寸一致性要提高很多)。
            The dimension accuracy of investment casting is high, generally up to CT4-6 (sand casting is CT10-13, die casting is CT5-7). Of course, due to the complex process of investment casting, there are many factors affecting the dimension accuracy of investment casting, such as shrinkage of die material, deformation of investment mould, linear change of shell during heating and cooling, shrinkage rate of alloy and so on. In the solidification process, the deformation of castings and so on, so the dimensional accuracy of ordinary investment casting is higher, but its consistency still needs to be improved (the size consistency of castings with medium and high temperature wax is much higher).
            壓制熔模時,采用型腔表面光潔度高的壓型,因此,熔模的表面光潔度也比較高。此外,型殼由耐高溫的特殊粘結劑和耐火材料配制成的耐火涂料涂掛在熔模上而制成,與熔融金屬直接接觸的型腔內表面光潔度高。所以,熔模鑄件的表面光潔度比一般鑄造件的高,一般可達Ra.1.6~3.2μm。
            When pressing the melting die, the high surface finish of the cavity is used, so the surface finish of the melting die is also higher. In addition, the shell is made of a refractory coating made of a special high temperature binder and refractory material, which is coated on the melting die. The inner surface of the cavity directly contacted with the molten metal has a high smoothness. Therefore, the surface finish of investment castings is higher than that of ordinary castings, generally up to Ra.1.6-3.2 um.

            上一頁:熔模鑄造工藝
            關鍵字:鑄件 熔模鑄件
            版權所有保定宏晟隆精密鑄造有限公司 網址:www.phecda.org 保定網站制作:遨游網絡
            電話:0312-8928995 傳真:0312-2115599 地址:保定南市區朱莊 推薦:不銹鋼鑄件,精密鑄造,精密鑄件,不銹鋼鑄件價格,精密鑄件加工廠家
            友鏈:nsk軸承經銷商 不銹鋼鑄件 隔離墩模具 螺桿式啟閉機 模鍛件 隔離墩鋼模具

            保定網站建設及優化保定遨游網絡公司


            亚洲va欧美va国产va在线