關閉
返回頂部

<address id="fhlll"></address>

      <form id="fhlll"></form>
      <form id="fhlll"><nobr id="fhlll"><meter id="fhlll"></meter></nobr></form>
      <form id="fhlll"></form>
          <noframes id="fhlll"><address id="fhlll"><nobr id="fhlll"></nobr></address> <address id="fhlll"><address id="fhlll"></address></address>

            聯系方式
            保定宏晟隆精密鑄造有限公司
            公司地址:保定南市區朱莊
            電 話:0312-8928995
            電 話:0312-2157611
            手 機:13833227175
            傳 真:0312-2115599
            網 址:www.phecda.org
            當前位置:不銹鋼鑄件表面的清理
            [來源:www.phecda.org] [作者:精密鑄造] [日期:18-05-29]
            不銹鋼鑄件表面的清理分為干、濕兩大類,干類清理法主要是拋丸處理,濕類清理法主要有點解液壓清砂、水清砂等,下面由濰坊凱龍泵業有限公司為大家介紹一下干類和濕類這兩大不銹鋼鑄件表面清的方法供大家參考借鑒。 Cleaning on the surface of the stainless steel castings divided into two categories: dry, wet, dry class cleaning method mainly blasting process, wet type hydraulic cleaning method is mainly a little solution deoxidization, water deoxidization, below by weifang kailong pump industry co., LTD. As an introduction to dry and wet these two stainless steel castings surface cleaning method for your reference. 干類清理法就是以拋丸處理為主的摩擦處理方式對不銹鋼鑄件表面進行清理,拋丸處理簡單的說就是以壓縮空氣為動力,讓彈丸以一定的速度噴射到不銹鋼鑄件的表面,清除表面的沾砂和氧化鐵皮等,但是這種摩擦清理方法由于效率低,清理不均勻、效果差等原因,已經被眾被造廠所采用,已經幾乎被淘汰掉。 Dry class cleaning method is mainly blasting process of friction surface treatment of stainless steel casting to clean, blasting process simple said is powered by compressed air, make the projectile at a certain speed sprayed onto the surface of the stainless steel castings, with sand and iron oxide on the surface of the clear, but the friction cleaning method because of the low efficiency, poor cleaning effect of uneven, reason, has been adopted by created in the factory, has almost been eliminated. 濕類情理法主要是電液錘效應原理,將高壓脈沖發生器通過置于水中的特殊電極進行相間放電,產生大的液力沖擊。由于不銹鋼鑄件表面粘附物與鑄件本身的彈性模數及振動頻率不同,從而達到清砂目的。對于形狀復雜的不銹鋼鑄件如深孔、盲孔、內腔有較為有效的清理效果。是目前應用最廣的一種不銹鋼鑄件在內的一系列鑄件的表面清理方式。 Wet principle mainly effect active class reasonable method, the high voltage pulse generator and discharge through the special electrode placed on the water, a big hydraulic impact. Because the stainless steel castings surface adhesion and elastic modulus of the casting and vibration frequency is different, so as to achieve the deoxidization purpose. For complex shape stainless steel castings, such as deep holes, blind holes, inner cavity has a relatively effective cleaning efficiency. Is the one of the most widely used a range of stainless steel castings, casting surface cleaning.
            版權所有保定宏晟隆精密鑄造有限公司 網址:www.phecda.org 保定網站制作:遨游網絡
            電話:0312-8928995 傳真:0312-2115599 地址:保定南市區朱莊 推薦:不銹鋼鑄件,精密鑄造,精密鑄件,不銹鋼鑄件價格,精密鑄件加工廠家
            友鏈:光纖激光切割機 不銹鋼鑄件 過電壓保護器 啟閉機

            保定網站建設及優化保定遨游網絡公司


            亚洲va欧美va国产va在线